dmesg - Gigabyte NVIDIA GeForce GTX 460

Return To Gigabyte NVIDIA GeForce GTX 460 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-42-generic (buildd@lgw01-54) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #49-Ubuntu SMP Tue Jun 28 21:26:26 UTC 2016 (Ubuntu 4.2.0-42.49-generic 4.2.8-ckt12)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
tseg: 00cff00000
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ceec8fff] usable
BIOS-e820: [mem 0x00000000ceec9000-0x00000000cef51fff] ACPI NVS
BIOS-e820: [mem 0x00000000cef52000-0x00000000cf032fff] reserved
BIOS-e820: [mem 0x00000000cf033000-0x00000000cf03bfff] ACPI data
BIOS-e820: [mem 0x00000000cf03c000-0x00000000cf2a1fff] reserved
BIOS-e820: [mem 0x00000000cf2a2000-0x00000000cf2a2fff] usable
BIOS-e820: [mem 0x00000000cf2a3000-0x00000000cf2b2fff] reserved
BIOS-e820: [mem 0x00000000cf2b3000-0x00000000cf2b3fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf2b4000-0x00000000cf2b4fff] usable
BIOS-e820: [mem 0x00000000cf2b5000-0x00000000cf2c0fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf2c1000-0x00000000cf2e7fff] reserved
BIOS-e820: [mem 0x00000000cf2e8000-0x00000000cf4eafff] ACPI NVS
BIOS-e820: [mem 0x00000000cf4eb000-0x00000000cf779fff] usable
BIOS-e820: [mem 0x00000000cf77a000-0x00000000cfeebfff] reserved
BIOS-e820: [mem 0x00000000cfeec000-0x00000000cfefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000022effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7640/990FXA-GD80 (MS-7640), BIOS V11.13 10/09/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-D2FFF write-protect
  D3000-EBFFF uncachable
  EC000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFF00000 mask FFFFFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000022f000000 aka 8944M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
total RAM covered: 3327M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcec0-0x000fcecf] mapped at [ffff8800000fcec0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x021f1000, 0x021f1fff] PGTABLE
BRK [0x021f2000, 0x021f2fff] PGTABLE
BRK [0x021f3000, 0x021f3fff] PGTABLE
init_memory_mapping: [mem 0x22ee00000-0x22effffff]
 [mem 0x22ee00000-0x22effffff] page 2M
BRK [0x021f4000, 0x021f4fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x22edfffff]
 [mem 0x220000000-0x22edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
 [mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xceec8fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0xbfffffff] page 1G
 [mem 0xc0000000-0xcedfffff] page 2M
 [mem 0xcee00000-0xceec8fff] page 4k
init_memory_mapping: [mem 0xcf2a2000-0xcf2a2fff]
 [mem 0xcf2a2000-0xcf2a2fff] page 4k
BRK [0x021f5000, 0x021f5fff] PGTABLE
init_memory_mapping: [mem 0xcf2b4000-0xcf2b4fff]
 [mem 0xcf2b4000-0xcf2b4fff] page 4k
init_memory_mapping: [mem 0xcf4eb000-0xcf779fff]
 [mem 0xcf4eb000-0xcf779fff] page 4k
BRK [0x021f6000, 0x021f6fff] PGTABLE
init_memory_mapping: [mem 0xcfeec000-0xcfefffff]
 [mem 0xcfeec000-0xcfefffff] page 4k
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
 [mem 0x100001000-0x1001fffff] page 4k
 [mem 0x100200000-0x13fffffff] page 2M
 [mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x33fa0000-0x35fc7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CF033068 000054 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000CF039CE0 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150619/tbfadt-654)
ACPI: DSDT 0x00000000CF033150 006B8B (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000CF2BBF80 000040
ACPI: APIC 0x00000000CF039DD8 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000CF039E78 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000CF039EB8 000038 (v01 ALASKA A M I    01072009 AMI  00000004)
ACPI: SSDT 0x00000000CF039EF0 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
ACPI: BGRT 0x00000000CF03B608 00003C (v00 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022effffff]
NODE_DATA(0) allocated [mem 0x22eff5000-0x22eff9fff]
 [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880226600000-ffff88022e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000022effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009afff]
  node   0: [mem 0x0000000000100000-0x00000000ceec8fff]
  node   0: [mem 0x00000000cf2a2000-0x00000000cf2a2fff]
  node   0: [mem 0x00000000cf2b4000-0x00000000cf2b4fff]
  node   0: [mem 0x00000000cf4eb000-0x00000000cf779fff]
  node   0: [mem 0x00000000cfeec000-0x00000000cfefffff]
  node   0: [mem 0x0000000100001000-0x000000022effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
On node 0 totalpages: 2089223
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3994 pages, LIFO batch:0
  DMA32 zone: 13190 pages used for memmap
  DMA32 zone: 844142 pages, LIFO batch:31
  Normal zone: 19392 pages used for memmap
  Normal zone: 1241087 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xceec9000-0xcef51fff]
PM: Registered nosave memory: [mem 0xcef52000-0xcf032fff]
PM: Registered nosave memory: [mem 0xcf033000-0xcf03bfff]
PM: Registered nosave memory: [mem 0xcf03c000-0xcf2a1fff]
PM: Registered nosave memory: [mem 0xcf2a3000-0xcf2b2fff]
PM: Registered nosave memory: [mem 0xcf2b3000-0xcf2b3fff]
PM: Registered nosave memory: [mem 0xcf2b5000-0xcf2c0fff]
PM: Registered nosave memory: [mem 0xcf2c1000-0xcf2e7fff]
PM: Registered nosave memory: [mem 0xcf2e8000-0xcf4eafff]
PM: Registered nosave memory: [mem 0xcf77a000-0xcfeebfff]
PM: Registered nosave memory: [mem 0xcff00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xcff00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88022ec00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2056556
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x10c000000-0x10dffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 8041472K/8356892K available (8187K kernel code, 1239K rwdata, 3808K rodata, 1464K init, 1292K bss, 315420K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:1032 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4000.076 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.15 BogoMIPS (lpj=16000304)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820a5000 - ffffffff820ac000)
ftrace: allocating 30962 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64001.21 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xceec9000-0xcef51fff] (561152 bytes)
PM: Registering ACPI NVS region [mem 0xcf2b3000-0xcf2b3fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xcf2b5000-0xcf2c0fff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xcf2e8000-0xcf4eafff] (2109440 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:01:54, date: 12/20/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe50b000-0xfe50b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe50a000-0xfe50afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe509000-0xfe5090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe508000-0xfe508fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe507000-0xfe5070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe500000-0xfe503fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe506000-0xfe506fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfe505000-0xfe505fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfe504000-0xfe5040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfdffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd8000000-0xdbffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xdc104000-0xdc104fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xdc100000-0xdc103fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe400000-0xfe401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe300000-0xfe301fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:05:00.0: [1095:3132] type 00 class 0x010400
pci 0000:05:00.0: reg 0x10: [mem 0xfe284000-0xfe28407f 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xfe280000-0xfe283fff 64bit]
pci 0000:05:00.0: reg 0x20: [io  0xc000-0xc07f]
pci 0000:05:00.0: reg 0x30: [mem 0xfe200000-0xfe27ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0a.0:   bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:08:00.0: reg 0x10: [mem 0xfe100000-0xfe1007ff 64bit]
pci 0000:08:00.0: reg 0x18: [io  0xb000-0xb0ff]
pci 0000:08:00.0: supports D2
pci 0000:08:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:15.1:   bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
e820: reserve RAM buffer [mem 0xceec9000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf2a3000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf2b5000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf77a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcff00000-0xcfffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c51] has been reserved
system 00:01: [io  0x0c52] has been reserved
system 00:01: [io  0x0c6c] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cd5] has been reserved
system 00:01: [io  0x0cd6-0x0cd7] has been reserved
system 00:01: [io  0x0cd8-0x0cdf] has been reserved
system 00:01: [io  0x0800-0x089f] could not be reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [io  0x0900-0x090f] has been reserved
system 00:01: [io  0x0910-0x091f] has been reserved
system 00:01: [io  0xfe00-0xfefe] has been reserved
system 00:01: [io  0x0485-0x0486] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfc000000-0xfe0fffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdbffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xdc100000-0xdc1fffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0a.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0a.0:   bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.1: PCI bridge to [bus 08]
pci 0000:00:15.1:   bridge window [io  0xb000-0xbfff]
pci 0000:00:15.1:   bridge window [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdbffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xdc100000-0xdc1fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:06: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:06: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:06: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:06: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:08: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:08: resource 1 [mem 0xfe100000-0xfe1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32928K (ffff880033fa0000 - ffff880035fc8000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x0600081c
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU3: patch_level=0x0600081c
microcode: CPU4: patch_level=0x0600081c
microcode: CPU5: patch_level=0x0600081c
microcode: CPU6: patch_level=0x0600081c
microcode: CPU7: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1482267714.892:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-42-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-42-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-42-generic xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-42-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe509000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-42-generic ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfe507000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-42-generic ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xfe504000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-42-generic ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:12.0: irq 18, io mem 0xfe50a000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.2.0-42-generic ohci_hcd
usb usb8: SerialNumber: 0000:00:12.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe508000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.2.0-42-generic ohci_hcd
usb usb9: SerialNumber: 0000:00:13.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe506000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 4.2.0-42-generic ohci_hcd
usb usb10: SerialNumber: 0000:00:14.5
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:16.0: irq 18, io mem 0xfe505000
usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: OHCI PCI host controller
usb usb11: Manufacturer: Linux 4.2.0-42-generic ohci_hcd
usb usb11: SerialNumber: 0000:00:16.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 7138f14b5cc626ba6e4b75860a1ee2082de820e2'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 12:729:45
rtc_cmos 00:05: setting system clock to 2016-12-20 21:01:55 UTC (1482267715)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1464K (ffffffff81f37000 - ffffffff820a5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 2040K (ffff880001802000 - ffff880001a00000)
Freeing unused kernel memory: 288K (ffff880001db8000 - ffff880001e00000)
random: systemd-udevd urandom read with 7 bits of entropy available
sata_sil24 0000:05:00.0: version 1.1
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
scsi host0: sata_sil24
scsi host1: sata_sil24
ata1: SATA max UDMA/100 host m128@0xfe284000 port 0xfe280000 irq 45
ata2: SATA max UDMA/100 host m128@0xfe284000 port 0xfe282000 irq 45
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000e70000, d4:3d:7e:38:67:a8, XID 0c900800 IRQ 47
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b280 irq 19
ata7: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b300 irq 19
ata8: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b380 irq 19
r8169 0000:02:00.0 enp2s0: renamed from eth0
firewire_ohci 0000:08:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
usb 8-1: new full-speed USB device number 2 using ohci-pci
ata3: SATA link down (SStatus 0 SControl 300)
usb 8-1: New USB device found, idVendor=0a05, idProduct=7211
usb 8-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 8-1: Product: USB2.0 HUB
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 4 ports detected
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: TOSHIBA DT01ACA100, MS2OA750, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata7.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata8.00: ATA-8: KINGSTON SV300S37A60G, 527ABBF0, max UDMA/133
ata8.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
firewire_core 0000:08:00.0: created device fw0: GUID 0010dc0001d327bf, S400
tsc: Refined TSC clocksource calibration: 4000.271 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a95c49abf, max_idle_ns: 440795244681 ns
usb 8-2: new low-speed USB device number 3 using ohci-pci
usb 8-2: New USB device found, idVendor=192f, idProduct=0416
usb 8-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-2: Product: USB Optical Mouse
usb 8-3: new full-speed USB device number 4 using ohci-pci
usb 8-3: New USB device found, idVendor=058f, idProduct=9360
usb 8-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-3: Product: USB Reader
usb 8-3: Manufacturer:  
usb 8-3: SerialNumber: 2004888
usb-storage 8-3:1.0: USB Mass Storage device detected
scsi host8: usb-storage 8-3:1.0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/0003:192F:0416.0001/input/input5
hid-generic 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:12.0-2/input0
usb 8-1.2: new low-speed USB device number 5 using ohci-pci
usb 8-1.2: New USB device found, idVendor=0e6a, idProduct=6001
usb 8-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 8-1.2: Product: HID Keyboard Device
clocksource: Switched to clocksource tsc
input: HID Keyboard Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1.2/8-1.2:1.0/0003:0E6A:6001.0002/input/input6
hid-generic 0003:0E6A:6001.0002: input,hidraw1: USB HID v1.10 Keyboard [HID Keyboard Device] on usb-0000:00:12.0-1.2/input0
input: HID Keyboard Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1.2/8-1.2:1.1/0003:0E6A:6001.0003/input/input7
hid-generic 0003:0E6A:6001.0003: input,hidraw2: USB HID v1.10 Device [HID Keyboard Device] on usb-0000:00:12.0-1.2/input1
ata1: SATA link down (SStatus 0 SControl 0)
scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
sd 8:0:0:0: Attached scsi generic sg0 type 0
sd 8:0:0:1: Attached scsi generic sg1 type 0
sd 8:0:0:2: Attached scsi generic sg2 type 0
sd 8:0:0:3: Attached scsi generic sg3 type 0
sd 8:0:0:0: [sda] Attached SCSI removable disk
sd 8:0:0:1: [sdb] Attached SCSI removable disk
sd 8:0:0:2: [sdc] Attached SCSI removable disk
sd 8:0:0:3: [sdd] Attached SCSI removable disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata2.00: ATA-8: ST1000DM003-1SB102, CC43, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1SB1 CC43 PQ: 0 ANSI: 5
sd 1:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sde] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg4 type 0
sd 1:0:0:0: [sde] Write Protect is off
sd 1:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access     ATA      TOSHIBA DT01ACA1 A750 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdf] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg5 type 0
sd 3:0:0:0: [sdf] Write Protect is off
sd 3:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdg] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg6 type 0
sd 4:0:0:0: [sdg] Write Protect is off
sd 4:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 5:0:0:0: [sdh] 4096-byte physical blocks
sd 5:0:0:0: Attached scsi generic sg7 type 0
sd 5:0:0:0: [sdh] Write Protect is off
sd 5:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sdi] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg8 type 0
sd 6:0:0:0: [sdi] Write Protect is off
sd 6:0:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 7:0:0:0: [sdj] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 7:0:0:0: Attached scsi generic sg9 type 0
sd 7:0:0:0: [sdj] Write Protect is off
sd 7:0:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdj: sdj1 sdj2 sdj3
sd 7:0:0:0: [sdj] Attached SCSI disk
sd 4:0:0:0: [sdg] Attached SCSI disk
 sde: sde1 sde2
sd 1:0:0:0: [sde] Attached SCSI disk
 sdf: sdf1 sdf2 < sdf5 sdf6 sdf7 >
sd 3:0:0:0: [sdf] Attached SCSI disk
sd 5:0:0:0: [sdh] Attached SCSI disk
sd 6:0:0:0: [sdi] Attached SCSI disk
md: bind
random: nonblocking pool is initialized
md: bind
md: bind
raid6: sse2x1   gen()  6701 MB/s
raid6: sse2x1   xor()  4965 MB/s
raid6: sse2x2   gen() 11291 MB/s
raid6: sse2x2   xor()  7888 MB/s
raid6: sse2x4   gen() 13698 MB/s
raid6: sse2x4   xor()  6875 MB/s
raid6: using algorithm sse2x4 gen() 13698 MB/s
raid6: .... xor() 6875 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
   avx       :  4780.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md/raid:md127: device sdh operational as raid disk 0
md/raid:md127: device sdg operational as raid disk 1
md/raid:md127: device sdi operational as raid disk 2
md/raid:md127: allocated 3308kB
md/raid:md127: raid level 5 active with 3 out of 3 devices, algorithm 2
RAID conf printout:
 --- level:5 rd:3 wd:3
 disk 0, o:1, dev:sdh
 disk 1, o:1, dev:sdg
 disk 2, o:1, dev:sdi
md127: detected capacity change from 0 to 2000140894208
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Read required files in advance.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (sde1): re-mounted. Opts: errors=remount-ro
systemd-journald[360]: Received request to flush runtime journal from PID 1
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MCE: In-kernel MCE decoding enabled.
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[drm] Initialized drm 1.1.0 20060810
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Adding 19529724k swap on /dev/sdf5.  Priority:-1 extents:1 across:19529724k FS
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input19
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  352.63  Sat Nov  7 21:25:42 PST 2015
Adding 7812092k swap on /dev/sde2.  Priority:-2 extents:1 across:7812092k FS
audit: type=1400 audit(1482267726.863:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267726.863:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267726.863:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267726.863:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267727.079:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267727.079:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267727.079:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267727.079:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267727.079:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=812 comm="apparmor_parser"
audit: type=1400 audit(1482267727.079:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser"
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 4000271272 Hz
vboxdrv: Successfully loaded version 5.1.10 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
audit_printk_skb: 33 callbacks suppressed
audit: type=1400 audit(1482267748.483:23): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/dconf/profile/gdm" pid=1629 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 6-1: New USB device found, idVendor=090c, idProduct=1000
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: SerialNumber: 12120858000263
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host9: usb-storage 6-1:1.0
scsi 9:0:0:0: Direct-Access                                    PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg10 type 0
sd 9:0:0:0: [sdk] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
sd 9:0:0:0: [sdk] Write Protect is off
sd 9:0:0:0: [sdk] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdk] No Caching mode page found
sd 9:0:0:0: [sdk] Assuming drive cache: write through
 sdk: sdk1
sd 9:0:0:0: [sdk] Attached SCSI removable disk
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
usb 6-1: USB disconnect, device number 2
usb 6-1: new high-speed USB device number 3 using ehci-pci
usb 6-1: New USB device found, idVendor=152d, idProduct=2338
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 6-1: Product: USB to ATA/ATAPI bridge
usb 6-1: Manufacturer: JMicron
usb 6-1: SerialNumber: 000000000009
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 6-1:1.0
scsi 10:0:0:0: Direct-Access     TOSHIBA  DT01ACA100            PQ: 0 ANSI: 2 CCS
sd 10:0:0:0: Attached scsi generic sg10 type 0
sd 10:0:0:0: [sdk] 244190646 4096-byte logical blocks: (976 GB/931 GiB)
sd 10:0:0:0: [sdk] Write Protect is off
sd 10:0:0:0: [sdk] Mode Sense: 28 00 00 00
sd 10:0:0:0: [sdk] No Caching mode page found
sd 10:0:0:0: [sdk] Assuming drive cache: write through
sd 10:0:0:0: [sdk] Attached SCSI disk
md: bind
usb 6-1: USB disconnect, device number 3
dleyna-server-s[6573]: segfault at 8 ip 00007fc303ddfe62 sp 00007ffcf825b990 error 4 in libdleyna-server-1.0.so.1.0.3[7fc303dd1000+20000]
usb 6-1: new high-speed USB device number 4 using ehci-pci
usb 6-1: New USB device found, idVendor=13fe, idProduct=4100
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: USB DISK 2.0
usb 6-1: Manufacturer:         
usb 6-1: SerialNumber: 0702268900D3A495
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host11: usb-storage 6-1:1.0
scsi 11:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
sd 11:0:0:0: Attached scsi generic sg10 type 0
sd 11:0:0:0: [sdl] 30283008 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 11:0:0:0: [sdl] Write Protect is off
sd 11:0:0:0: [sdl] Mode Sense: 23 00 00 00
sd 11:0:0:0: [sdl] No Caching mode page found
sd 11:0:0:0: [sdl] Assuming drive cache: write through
 sdl: sdl1 sdl2
sd 11:0:0:0: [sdl] Attached SCSI removable disk
EXT4-fs (sdl2): mounted filesystem with ordered data mode. Opts: (null)
usb 6-1: USB disconnect, device number 4
usb 6-1: new high-speed USB device number 5 using ehci-pci
usb 6-1: New USB device found, idVendor=090c, idProduct=1000
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: SerialNumber: 12120858000263
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host12: usb-storage 6-1:1.0
scsi 12:0:0:0: Direct-Access                                    PQ: 0 ANSI: 4
sd 12:0:0:0: Attached scsi generic sg10 type 0
sd 12:0:0:0: [sdl] 31129600 512-byte logical blocks: (15.9 GB/14.8 GiB)
sd 12:0:0:0: [sdl] Write Protect is off
sd 12:0:0:0: [sdl] Mode Sense: 43 00 00 00
sd 12:0:0:0: [sdl] No Caching mode page found
sd 12:0:0:0: [sdl] Assuming drive cache: write through
 sdl: sdl1
sd 12:0:0:0: [sdl] Attached SCSI removable disk
sd 12:0:0:0: [sdl] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdl] Sense Key : Not Ready [current] 
sd 12:0:0:0: [sdl] Add. Sense: Medium not present
sd 12:0:0:0: [sdl] CDB: Read(10) 28 00 00 00 0b 00 00 00 08 00
blk_update_request: I/O error, dev sdl, sector 2816
sd 12:0:0:0: [sdl] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdl] Sense Key : Not Ready [current] 
sd 12:0:0:0: [sdl] Add. Sense: Medium not present
sd 12:0:0:0: [sdl] CDB: Read(10) 28 00 00 00 0b 00 00 00 08 00
blk_update_request: I/O error, dev sdl, sector 2816
Buffer I/O error on dev sdl1, logical block 96, async page read
usb 6-1: USB disconnect, device number 5

Return To Gigabyte NVIDIA GeForce GTX 460 System Information